Wireless Pressure Wave Switch Air Wave Switch Safety Edge for Industrial Doors

• Customization: Available
• Type: Wireless Pressure Wave Switch
• Output Signal Type: Switching Type
• Model NO.: WSD-001
• Material: Plastic
• Feature: SemiConductor
• IP Rating: IP65
• Certification: CE
• Customized: Customized
• 2 In1: Air Wave and Contact Strip
• Life Cycle: 600,000
• Fail Safe: Fault Indication
• IP65: IP65 Design
• Transport Package: Carton
• Specification: 110*25*35mm
• Trademark: Giants
• Origin: China
• HS Code: 2702100000
• Production Capacity: 50000/Year
• Package Size: 12.00cm * 2.00cm * 3.00cm
• Package Gross Weight: 0.200kg
• Lead Time: 10 days (1 - 1 Pieces) ; To be negotiated ( > 1 Pieces)

Product Description

 

Basci information

WSD-001 wireless pressure wave/contact strip switch
Wireless Pressure Wave/Contact Strip Switch 2-in-1.
Used for the safety protection of industrial doors, fast foors, garage doors, etc.Long battery life, no need for coding, user-friendly.

Key Features

 

• 2 in 1: wireless pressure wave /contact strip switch High Versatility
• Battery Standby Switch Extends Lifespan
• Dual Reminder for Low Battery Easy Identification
• Coding push button
• No need to open the cover

Product Parameters

 

Dimension	135mm*40mm*32mm(2 parts)
Transmitter frequency	433MHz
Operating voltage	24VDC
Output type	Relay(Potential free contact)
Battery type	2*CR2032
Response time	<0.1S
Response distance	>30m

Code learning (factory default has been learned, usually no need to learn again):
1.Press the receiving terminal's code acceptance button for 3 seconds, and the receiving terminal's blue light will flash;
2.Blow air to the air pressure switch (or press the code button on the transmitter end), and the blue light will turn on;
3.The blue light on the receiving end flashes and then returns to normal, indicating successful pairing. Mode selection (transmitting end):
When S1 is selected, either the air pressure input or the J2 terminal signal input is received, and the receiving relay outputs a pulse signal.
When S2 is selected, the receiving relay outputs a pulse signal when the air pressure input is received;
When the J2 terminal signal is input, the receiving relay output maintains the signal until the J2 signal is disconnected.
Replace the battery (transmitting terminal):
4.If the red indicator light on the transmitting end is constantly on, it indicates that the battery is low and needs to be replaced;
5.If the blue indicator light on the receiving end flashes, it indicates that the battery is low and should be replaced or recharged to stop flashing
6.Loosen the fixing screws of the circuit board at the transmitting end and replace the two CR2032 batteries on the back.