Safety Edge and Contact Strip Switch for Industrial Doors

• Customization: Available
• Type: Wireless Pressure Wave Switch
• Output Signal Type: Switching Type
• Model NO.: WSD-001
• Material: Plastic
• Feature: SemiConductor
• IP Rating: IP65
• Certification: CE
• Customized: Customized
• 2 In1: Air Wave and Contact Strip
• Life Cycle: 600,000
• Fail Safe: Fault Indication
• IP65: IP65 Design
• Transport Package: Carton
• Specification: 110*25*35mm
• Trademark: Giants
• Origin: China
• HS Code: 2702100000
• Production Capacity: 50000/Year

Product Description

 

Basci information

WSD-001: The Wireless Pressure Wave/Contact Strip Switch
Introducing the 2-in-1 Wireless Pressure Wave/Contact Strip Switch.
Designed for the utmost safety of industrial doors, fast doors, garage doors, and more. Enjoy an impressive battery lifespan, hassle-free operation without coding, ensuring an exceptionally user-friendly experience.

Key Features

• Innovative 2-in-1 Design: Seamlessly combines a wireless pressure wave and contact strip switch for high versatility.
• Extended Battery Standby: Prolongs device lifespan for enduring performance.
• Dual Low Battery Notifications: Facilitates easy identification and timely action.
• Hassle-free Coding with Push Button
• Innovative Design: No need to open the cover for adjustments

Product Parameters

 

Dimension	135mm*40mm*32mm(2 parts)
Transmitter frequency	433MHz
Operating voltage	24VDC
Output type	Relay(Potential free contact)
Battery type	2*CR2032
Response time	<0.1S
Response distance	>30m

Streamlined Code Learning Process (Pre-learned at factory, typically no further learning required):
1. Hold the receiving terminal's code acceptance button for 3 seconds; the blue light will flash as a signal.
2. Activate by blowing air into the air pressure switch (or pressing the code button on the transmitter end), resulting in a steady blue light.
3. Flashing of the blue light on the receiving end followed by a return to normalcy indicates a successful pairing. Mode Selection for Transmitting End:
Choose S1: Whether air pressure input or J2 terminal signal input is received, the receiving relay outputs a pulse signal.
Select S2: The relay outputs a pulse signal in response to air pressure input;
When J2 terminal signal is input, the relay output sustains the signal until the J2 signal ceases.
Battery Replacement Instructions (Transmitting Terminal):
4. A persistent red indicator on the transmitting end signals low battery, necessitating a replacement.
5. A flashing blue indicator on the receiving end denotes low battery, advising a replacement or recharge to cease flashing.
6. Unscrew the circuit board at the transmitting end to replace the two CR2032 batteries on the rear side.