Wireless Pressure Wave Switch and Contact Safety Edge Sensor

• Customization: Available
• Type: Wireless Pressure Wave Switch
• Output Signal Type: Switching Type
• Model NO.: WSD-001
• Material: Plastic
• Feature: SemiConductor
• IP Rating: IP65
• Certification: CE
• Customized: Customized
• 2 In1: Air Wave and Contact Strip
• Life Cycle: 600,000
• Fail Safe: Fault Indication
• IP65: IP65 Design
• Transport Package: Carton
• Specification: 110*25*35mm
• Trademark: Giants
• Origin: China
• HS Code: 2702100000
• Production Capacity: 50000/Year

Product Description

Basci information

WSD-001 Wireless Pressure Wave/Contact Strip Switch: A revolutionary device.
Wireless Pressure Wave/Contact Strip Switch 2-in-1: Efficiently integrates two functions into a single unit.
Designed for the utmost safety of industrial doors, fast doors, and garage doors. Enjoy long-lasting battery life, effortless installation with no coding required, and a user-friendly experience.

Key Features

• 2-in-1: Wireless Pressure Wave/Contact Strip Switch - A masterpiece of high versatility and adaptability.
• Battery Standby Switch Extends Lifespan: Ensures prolonged operation without frequent interventions.
• Dual Reminder for Low Battery: Provides easy identification and timely notifications for battery replacement.
• Coding Push Button: Simplifies the pairing process with a seamless push.
• No Need to Open the Cover: Enjoy convenience with hassle-free access.

Product Parameters

Dimension	135mm*40mm*32mm(2 parts)
Transmitter frequency	433MHz
Operating voltage	24VDC
Output type	Relay(Potential free contact)
Battery type	2*CR2032
Response time	<0.1S
Response distance	>30m

Code Learning: Pre-programmed at the factory for your convenience, eliminating the need for re-learning.
1. Press the code acceptance button on the receiver for 3 seconds to initiate pairing; observe the blue light flashing.
2. Activate the air pressure switch or press the transmitter's code button, allowing the blue light to glow steadily.
3. The blue light will flash and return to normal, confirming successful pairing and readiness for use. Mode Selection (Transmitting End): Choose the desired operational mode.
Select S1 to enable the receiving relay to output a pulse signal upon receiving air pressure input or J2 terminal signal input.
Select S2 for the receiving relay to emit a pulse signal when air pressure input is detected.
With J2 terminal input, the relay maintains output until the J2 signal is disengaged.
Replace the Battery (Transmitting Terminal): Ensure consistent performance with timely battery replacements.
4. A constantly lit red indicator on the transmitter signals low battery—prompt replacement is advised.
5. A flashing blue indicator on the receiver signifies low battery—replace or recharge to resolve.
6. Remove the transmitter's circuit board screws and replace both CR2032 batteries with ease and efficiency.