Wireless Safety Edge with Air Wave and Contact Strip Technology

• Customization: Available
• Type: Wireless Pressure Wave Switch
• Output Signal Type: Switching Type
• Model NO.: WSD-001
• Material: Plastic
• Feature: SemiConductor
• IP Rating: IP65
• Certification: CE
• Customized: Customized
• 2 In1: Air Wave and Contact Strip
• Life Cycle: 600,000
• Fail Safe: Fault Indication
• IP65: IP65 Design
• Transport Package: Carton
• Specification: 110*25*35mm
• Trademark: Giants
• Origin: China
• HS Code: 2702100000
• Production Capacity: 50000/Year

Product Description

Basci information

WSD-001 Wireless Pressure Wave/Contact Strip Switch
Revolutionary Wireless Pressure Wave and Contact Strip Switch, 2-in-1 Design.
Designed for the safety protection of industrial doors, fast doors, garage doors, and more. Boasting an impressive long battery life with no coding required, this device is incredibly user-friendly.

Key Features

• Ingenious 2-in-1: Wireless Pressure Wave and Contact Strip Switch Offering High Versatility
• Enhanced Battery Standby Switch Maximizes Lifespan
• Dual Reminder for Low Battery, Ensures Easy Identification
• Effortless Coding with a Push Button
• Convenient Operation—No Need to Open the Cover

Product Parameters

Dimension	135mm*40mm*32mm(2 parts)
Transmitter frequency	433MHz
Operating voltage	24VDC
Output type	Relay(Potential free contact)
Battery type	2*CR2032
Response time	<0.1S
Response distance	>30m

Code Learning (Factory default setting is pre-learned, additional learning rarely required):
1. Press and hold the receiving terminal's code acceptance button for 3 seconds until the blue light flashes;
2. Blow air into the air pressure switch (or press the code button on the transmitter end), and the blue light will illuminate steadily;
3. The blue light on the receiving end will flash and then revert to its normal state, signifying successful pairing. Mode Selection (Transmitting End):
Select S1 to receive input from either air pressure or J2 terminal signal. The receiving relay then outputs a pulse signal.
Select S2 for the receiving relay to emit a pulse signal upon air pressure input;
With J2 terminal input, the receiving relay maintains the output signal until the J2 signal is disconnected.
Battery Replacement (Transmitting Terminal):
4. A continuously lit red indicator on the transmitting end signals a low battery requiring replacement;
5. A flashing blue indicator on the receiving end indicates the battery is running low and needs replacement or recharging to stop the flashing.
6. Loosen the fastening screws of the circuit board at the transmitting end and replace the two CR2032 batteries on the reverse side.